|
|
|
|
|
To print maintenance logs for a given aircraft, the following "Maintenance Report Options" dialog is shown
First, the aircraft for this report must be selected.
In the "Field Maintenance Options" group you may include or exclude field maintenance logs. You may also print field maintenance logs only.
In the Report Options group you may choose to include the procedures performed for each maintenance log by checking the "Show Procedures" check box.
You may select the "Show Part Used" to also show all parts used during that maintenance log.
If the Show Preview option is not checked then the report is sent directly to the printer.
Finally, you may limit the report to logs performed on a specific date range. Select "Use Date Filter" in the "Set Date Range" group and then select the start and end date.
Press "OK" to print the report or "Cancel" to exit.