When selected the "Log Book Options" dialog is shown as seen below:
First an Aircraft must be selected. This will be automatically filled in if the report was generated by an aircraft's menu.
Next you may select to limit the logs to flights flown by a specific pilot. Select None for all pilots.
Next you may select to limit the logs to flights flown by a specific field. Select None for all fields.
Next you may limit the logs printed to those where certain maintenance procedures were performed.
Next you may limit the logs to a specific date range. To do this check the "Use Date Filter" checkbox in the "Set Date Range" group then set both the start and end day for the report.
Finally, in the "Report Options" group you may chose to include the flight notes and or the field maintenance notes. You may also select preview to preview the report before printing. If the Show Preview option is not checked then the report is sent directly to the printer.
Press "OK" to print the report or "Cancel" to exit