Page 1 of 1

Print Flight Log – can’t see the second line

PostPosted: Mon May 09, 2005 9:59 am
by Knud Pedersen DENMARK
From the ”Add Flight Log” in the “Description of Maintenance or Adjustments” I´m tying a VERY long line or using the Enter-key to make a new line.
Then when “printing” the log Book the it is ONLY the first line that is visible in the “Maintenance Notes“
:cry: :(
But if I in the Report Options remove the “Show Flight Notes” the ALL the lines a visible!!
If chancing/adding text in the “Maintenance Detail” box, in a “Field Maintenance”, when it is opened from the from the Maintenace Logs, the new text is NOT updated when printing the Flight Log.
It is updated when open the “Field Maintenance” from the “Flights”menu, and then press save.

Knud Pedersen

PostPosted: Sat Jun 11, 2005 9:55 am
by slammers
I could not reproduce your first problem. With very long maintenance notes it printed out fine with or without the flight notes being turned on.

However, the field maintenance notes updating from the Maintenance log screen has been fixed.