Schedule Maintenance and Overdue Maintenance Report Bug

Bug Reports

Moderator: slammers

Schedule Maintenance and Overdue Maintenance Report Bug

Postby davehour » Sun Apr 13, 2003 5:04 pm

Hi:

Thanks for this nice program.

I found with the latest version, 1.8.3 137, that if you have a scheduled maintenance item listed in the "print overdue maintenance" under the Reports menu, and then perform the procedure in a maintenace log, the item is not removed from the next report I print after the procedure is done. If I go to the maintenance schedule folder under the maintenance logs folder of the particular model I'm working in, the procedure list there has the item not marked overdue anymore and the proper last performed date is displayed. But as I said, the overdue printout keeps displaying the overdue item although the procedure list in the maintenace schedule folder is not.

I refresh the folders, I close and re-open the program and even have re-started the pc, and the problem is not solved.

Thank you very much.
davehour
Junior Member
 
Posts: 5
Joined: Sun Jun 23, 2002 1:02 pm

Postby slammers » Tue Apr 15, 2003 8:42 am

I just tried this an you are correct.

I will put this at the top of my list.
Shawn
slammers
Senior Member
 
Posts: 176
Joined: Thu Sep 06, 2001 5:00 pm
Location: Delta, B.C.

Postby davehour » Tue Apr 15, 2003 6:58 pm

Thanks slammers.
davehour
Junior Member
 
Posts: 5
Joined: Sun Jun 23, 2002 1:02 pm


Return to Bug Reports

Who is online

Users browsing this forum: No registered users and 8 guests

cron