Page 1 of 1

Schedule Maintenance and Overdue Maintenance Report Bug

PostPosted: Sun Apr 13, 2003 5:04 pm
by davehour
Hi:

Thanks for this nice program.

I found with the latest version, 1.8.3 137, that if you have a scheduled maintenance item listed in the "print overdue maintenance" under the Reports menu, and then perform the procedure in a maintenace log, the item is not removed from the next report I print after the procedure is done. If I go to the maintenance schedule folder under the maintenance logs folder of the particular model I'm working in, the procedure list there has the item not marked overdue anymore and the proper last performed date is displayed. But as I said, the overdue printout keeps displaying the overdue item although the procedure list in the maintenace schedule folder is not.

I refresh the folders, I close and re-open the program and even have re-started the pc, and the problem is not solved.

Thank you very much.

PostPosted: Tue Apr 15, 2003 8:42 am
by slammers
I just tried this an you are correct.

I will put this at the top of my list.
Shawn

PostPosted: Tue Apr 15, 2003 6:58 pm
by davehour
Thanks slammers.