G 62 Prop mount


Moderator: slammers

G 62 Prop mount

Postby THE YANK » Thu Sep 11, 2003 9:30 am

I've mounted a G 62 to my Christen Eagle, but the thrust plate has 2 pins in to keep the prop from backing off. With these pins I can't use a spinner with a backplate,'cause of the pins.
Should I ether take out the pins or drill out the backplate & trust the backplate & thrust washer to hold the prop ?
Junior Member
Posts: 1
Joined: Thu May 08, 2003 10:17 pm
Location: Columbia,Tn.

Return to Engines

Who is online

Users browsing this forum: No registered users and 1 guest